Skip to content
Contact

Since 2014Proven experienceDirect technical service

Comfort, invisibly engineered

Why energEA

  • Climate, control and management

    Climate control, ventilation and control and management systems (home automation and BMS).

  • Wellness, spa and pools

    Sauna, hammam, cold plunge, spa and pool designed together with the climate system, so each space has its own temperature and air, with no last-minute add-ons.

  • Since 2014

    Made-to-measure projects and a technical service that is still there once the installation is finished.

Bright living room with tall windows onto the trees, pale sofas and linear air diffusers built into the ceiling

01 · HVAC

Climate and comfort

Climate control, air renewal and domestic hot water (DHW) production, in a single project.

  • Air-based climate control

    Split, ducted, VRF (Variable Refrigerant Flow) and fan coil systems built into ceilings and joinery, with units barely seen or heard.

  • Heat pumps

    Heating, cooling and hot water from a single system that draws its energy from the air or the ground.

  • Underfloor coolingUnderfloor heating

    A cool floor in summer, using the same underfloor heating circuit. No units on show.In winter, warmth rises from the floor and spreads evenly through the room, with no radiators or draughts.

  • Air renewal

    Clean air in every room and humidity under control, with the windows closed. With heat recovery, the house is ventilated without losing its warmth or its coolness.

  • Plumbing and hot water

    The complete water installation and domestic hot water, using a heat pump, chiller, water heater or whichever system best suits each project.

02 · Control

KNX control and automation

Your home, in a single gesture.

Systems on the KNX bus

Tap a system to see it on the plan.

Dark grey four-button wall keypad next to a door handle

  • KNX bus
  • Push-button
  • Thermostat
  • Sensor (CO₂, humidity)
  • Presence detector (P)
  • KNX cabinet
  • Ducted unit (ceiling void)
  • Diffuser
  • Return grille
  • Water to the units, flow and return
  • Heat pump (HP, outdoors)
  • Buffer tank and hot water cylinder (DHW)
  • Heat pump water, flow and return
  • Heat recovery unit
  • Fresh air to bedrooms and living room
  • Extract from bathrooms and kitchen
  • Grille
  • Outdoor air intake
  • Exhaust air
  • Underfloor heating manifold
  • Underfloor loop
  • Pump, filter and heat pump
  • Overflow edge and balance tank
  • Dehumidifier (DH, ceiling void)
  • Dry air towards the glazing
  • Heat exchanger (HEAT EX), heats the spa water
  • Hot water to the spa
  • Motorised blind
  • Awning
  • Light fitting
  • Alarm perimeter
  • Alarm keypad
  • Energy meter

Tap a scene and watch the plan.

Choose an idea to see how the system takes care of it.

I want the house to shade itself from the sun

  • Blinds come down when the sun hits the façade full on.
  • With a wind and rain sensor, awnings retract on their own.
  • In the morning, blinds rise at the time you set.

I want every room at its own temperature

  • Each bedroom with its own temperature and schedule.
  • With presence detectors, empty rooms switch to energy-saving mode.
  • Adjust the climate from your phone, even when you’re away.

I want the pool ready for a swim

  • Check and change the water temperature from your phone.
  • Heat the water only on the days and at the times it’s used.
  • Pool filtration and lighting, each on its own schedule.

I want the sauna ready when I get home

  • Switch on the sauna or spa from your phone before you arrive.
  • Automatic switch-off once the set time is up.
  • A scene that dims the lights and starts the ventilation.

I want to change the mood at the touch of a button

  • Scenes such as ‘Dinner’ or ‘Night’ that set lights, blinds and climate at once.
  • At night, soft path lighting when someone walks by.
  • Outdoor lights come on at dusk and go off at the time you set.

I want to leave the house without a second thought

  • One command on the way out switches off the lights, lowers the blinds and sets the climate to away.
  • With window contacts, a phone alert if one has been left open.
  • Before you head back, switch on the climate so the house is just right.
Drag or use the arrow keys

What you don’t see is designed too. And enjoyed.

Wellbeing is the new luxury.

Timber sauna with long benches, warm light beneath the seats and a round stone heater in the middle

03 · Wellbeing

Wellness, spa and pools

We design made-to-measure wellness spaces, built around your post-workout routine and the end of the day.

Sauna, cold plunge and hot-cold contrast help improve performance and recovery.

04 · Process

One project, start to finish

Five steps, from the first visit to after-sales technical service.

  1. Survey

    On-site survey, heat-load calculations for every room, and design of every climate, control, water and wellness installation.

  2. Proposal

    A technical solution and a detailed quote, setting out which systems go in, where they go and how they are controlled.

  3. Installation

    Installed at the pace of the build, in step with the architect, the interior designer and the other trades.

  4. Commissioning

    Testing, fine-tuning of every system and a clear handover for the owners.

  5. After-sales

    Direct technical service, with maintenance, servicing and support and no middlemen.

05 · Spaces

Spaces

Ideas for living spaces, bathrooms and spas where comfort is part of the design from the start.

We are preparing photos of our projects

  • Climate control Coming soon
  • Control and automation Coming soon
  • Water and design Coming soon
  • Wellness & spa Coming soon

Black and white double-height living room with tall windows and curtains

06 · energEA

Engineering built into the architecture.

HVAC, control and wellness engineering.

We have been designing building services since 2014. We calculate thermal loads, flow rates and distribution networks, and size every unit to the real needs of the building.

We integrate the services into the architecture from the design stage. Routes, plant spaces and the position of equipment and terminals are defined before work starts on site.

We install, commission and maintain what we design, with a single technical lead throughout the service life of the installation.

Brands we work with

Let’s talk

Tell us about your project.

energea@energeaproyectos.com